Certified automation individual (PLC, HMI, SCADA) and qualified Electronics & Instrumentation (E&I) engineer with demonstrated history of working in the process industries. Skilled in project management, industrial instrumentation & process control, automation and SCADA Installation. Strong automation professional with a Bachelor in Electronics Engineering (B.E.) and currently pursuing Master of Engineering in the Power System Engineering concentrated in automation, control systems and power plants.
Working at Amreli Steels Limited at new rolling mill project. Having strong experience of electrical and electronics machineries erection,erection of HV,MV panels, installation of electrical & electronics instruments, commissioning of derives, Plant automation and SCADA installation.
WORKING AS A MAINTENANCE ENGINEER:
* Support operation team in oder to ensure continous process.To analyize any type of miss roll root cause in IBA analysior, and rectify captured issues.
* To perform troubleshooting of operational equipment's in order to avoid any functional breakdowns during continuous production process.
* To monitor operation and keep eye on equipment's performance.
* To resolve all operating issues raised during operations & perform regular/periodic maintenance activities on all equipment.
* To ensure effective operations of equipment's with contingency planning to minimize breakdowns.
WORKED AS A PROJECT ENGINEER:
* Erection & Installation of electrical and electronics equipment's.
* Testing & Commissioning of plant.
Working at Rays Control Engineering Services as an Electronics & Instrumentation (E&I) Engineer. A well Known “Automated and Control” Solution Provider Company. Since my joining I have worked on different automation and control system projects in Pakistan famous industries.
Curing Presses Monitoring System (SCADA) at General Tyre & Rubber.
Job Description:
• I have installed 3 wire RTDs for temperature measurement of all presses.
• Installed and setting of Shinko’s temperature controller (PID) for controlling set point of individual presses through current to pressure convertor (I to P Convertor).
• Installed pressure transmitters for measuring the pressure of all presses and header (Main supply) pressure as well.
• Every row had its own PLCs and every row contain 26 presses. All presses are connected with its own PLC through “MOD BUS”.
• Made some simple level program on “GX Work” for PLCs. We have used FX3U Mitsubishi PLCs.
• Designed HMI at initial level using Wincc.
Automatic Glucose Draining System from Tanks at Hilal Foods Private Limited.
Job Description:
• Installed level sensor for sensing the level of glucose tanks.
• Installed load cells for weighing the weight of certain amount of glucose.
• Installed solenoid valve for open and close the tanks to drain a specific amount of glucose.
• Installed RTDs for sensing the temperature of hot water of glucose tanks.
• Designing weintec HMI.
• Made some program of PLCs.
Designed Omron HMI for Curing Press at General Tyre & Rubber.
Job Description:
Working of an Omron HMI.
Being as an Intern. I have done my internship for a month in Applied Physics, Computer and instrumentation Center. I served as a trainee in Pakistan Council of Scientific and Industrial Research (PCSIR), where I studied about various equipment’s and tools used for testing, calibration and correcting Industrial equipment’s. I get familiarize with the working environment of the Pakistan Council of Scientific and Industrial Research (PCSIR) where different industries, universities and laboratories send their equipment’s for testing and calibration purpose in order to meet ISO standards. During my internship period I also observed that Pakistan Council of Scientific and Industrial Research (PCSIR) Center have different multiple departments and they are conducting researches on different future innovations so that they would be able to introduce latest technology to their people. Pakistan Council of Scientific and Industrial Research (PCSIR) consist of several shops. Instrument Shop and Electrical Shop in electrical department.
Worked as a Trainee Engineer. I have done my internship for a month in Maintenance Engineering department I served as a trainee in Pakistan International Airlines, where I studied about various equipment s and tools used for aircraft maintenance, and above all, I get familiarize with the working environment of the Airline Engineering/Maintenance Department. It consist of three shops.
Instrument Shop:Instrument shop belongs to the all air craft sensors, auto pilot section, navigation,safety and comfort section etc.
Electrical Shop: All aircraft power,APU,Batteries are under this shop.
Radio Shop:Radar,navigation,communication are under this shop.
Worked as a Trainee Engineer Internship for more than a month in PAKISTAN TELECOMMUNICATION (PTCL) in Switching, Transmission & Wireless Local Loop (WLL) Departments.
Responsibilities:
An Electronics Engineer could be a Security Guard. Strange!!!
If you think you can't, you wont,and if you think you can,you will.Just trust on yourself and keep strong believe in ALLAH you will do anything whatever you want to do.
Basically I have been doing this job as a part time in order to earn sufficient amount of money for university expenses.I have been working at Security 2000 (Pvt.) Ltd as a security guard since 2012,it was that time when i got admission call from PAF-KIET and PAF-KIET confirmed my admission in Electronics Engineering.I am still doing this job as a part time as during my Engineering.Why i chose to join Security 2000 (Pvt.) Ltd as a security guard???Yes Because i wanted to continue my bachelor and i needed an unstoppable source of income that made my bachelor towards completion.My parents could not afford my university fee.But By grace of ALMIGHTY ALLAH and full support of my parents i have completed my bachelor with flying colors.
Every thing is possible.It is something like this if you tired at practice though you tell yourself you are not tired you can push through.But if you tell yourself that you are sick or tired you immediately stop there because your body follow your mind. So it is concluded that at that time if i thought that "how can i do this job"surly i could not do this job till now.
This porject was funded by National ICT R&D Fund Ministry Of Information & Technology Under National Grassroots ICT Research Initiative 2015-2016.
In the present era, from the standpoint of security and defense, surveillance has become essential in order to monitor suspects, collect intelligence and to provide tactical advantage in case of covert missions – ranging from arrests to raids on belligerent fortifications. For such purposes, a device is needed that cannot be seen or detected easily and can work properly even if radio signal jammers are installed on site.
For this purpose, Laser based eavesdropping System also known as Laser microphone, Laser bug, or its technical name “Active Transduction of Distant Signals through Optical Coupling System” is one of the better choices. This device does not need any physical connection or physical placement in the area/room under observation. It is highly secure and an effective source to get audio surveillance by just pointing the laser beam on the glass surface of the window/door and reflecting back to the receiver that converts it into audible sound. It is an ideal device especially for enforcement purpose in order to have surveillance on the targeted area/room of the culprits to avoid any unwanted happenings. The key motivation is to design such a system that can be placed at a suitable distance and that cannot be detect easily and give accurate results.
We have constructed the Laser Based Eavesdropping System by The laser beam have been emitted by transmitter at a distance from the observing room, laser beam will hit the glass window of the room and buckle the sound waves by means of vibrations and reflect back to the receiver, and those vibrations will be converted in to audible sound by means of filtration and amplification.
Our innovation was to design such as Laser Based Eavesdropping System by means of a laser beam from a particular distance the device or system cannot be detected easily, also the device must capable to catch very minute vibrations with accuracy.
Throughout my under-graduation, received Honor awards from Director of PAF-KIET for maintaining GPA above 3.50 and also avail scholarships up to 50% in every semester of Engineering.