Pak Euro Metal, Karachi, Pakistan

About Pak Euro Metal Pakistan

• Indenting Company for Steel Coils, Sheets etc

  PAKEURO METAL has been operating as an Indenting agency since many years.
  We are doing indent business of flat iron & steel products from various countries of Europe, America, Canada, South Africa, Australia, Singapore, Japan, Korea, Taiwan, UAE, China, etc.
  
  We have established our contacts globally to provide our customers the best materials at affordable prices. We are here to provide quality, timely and reliable response to our principals and customers. We believe in your profit. We are bringing positive changes by diminishing our weakness and enhancing the strength. We want to capture the trust of our customers and suppliers in a true way.
  The Principals & Customers are our assets and their trust is our profit.
  
  Based on our iron & steel trading expertise and experience, we endeavor to supply products that meet the diversified needs of our customers and to provide sophisticated services based on our advanced information control. We aim to satisfy a wide range of customers by providing the required products. With the motto “Quality Commitment”, PAKEURO METAL has committed to
  customers as well as to suppliers full satisfaction of quality services.
  
  PAKEURO METAL has been dealing with companies from many countries all over the world and acts in the interest of suppliers worldwide by finding solutions that suit the supplier.
  
  As the people are the face and power of a company and as such, PAKEURO METAL is backed by valued and professional people.

• Our Products

  We deal in following Products:
  
  Hot dip galvanized is a form of galvanization. It is the process of coating iron, steel or aluminium with a layer of zinc by immersing the metal in a bath of molten zinc at a temperature of around 860 °F (460 °C). When exposed to the atmosphere, the pure zinc (Zn) reacts with oxygen (O2) to form zinc oxide (ZnO), which further reacts with carbon dioxide (CO2) to form zinc carbonate (ZnCO3), a usually dull grey, fairly strong material that stops further corrosion in many circumstances, protecting the steel below from the elements. Galvanized steel is widely used in applications where corrosion resistance is needed, and can be identified by the crystallization patterning on the surface (often called a "spangle").
  
  Electrogalvanized is a galvanization process in which a layer of zinc is bonded to steel in order to protect against corrosion. The process involves electroplating, running a current of electricity through a saline/zinc solution with a zinc anode and steel conductor
  
  Galvannealed is the result from the combined process of galvanizing and annealing to produce specialized sheets of steel. The galvanization is made through the hot-dipping (Hot-dip galvanizing) process and an immediate in-line annealing and gives a very fine grayish matte finish. Galvanneal does not flake off its galvanized coating when formed, stamped, and bent. The very fine matte finish acts like a primer, allowing paint to adhere easily, and is very rust proof; only
  white to dark grey marks appear if it comes in contact with water.
  
  Galvalume
  The galvalume coating is an alloy consisting of approximately 55% aluminum, 43.4% zinc and 1.5% silicon by weight, which is applied to steel by the continuous hot dip process.
  Galvalume steel sheet offers the best qualities of aluminum coated (aluminized) and zinc coated steel sheet (galvanized). The aluminum/zinc coating has barrier corrosion resistance and heat resistance similar to aluminum coated steel. It also has good bare edge galvanic protection and forming qualities similar to continuously annealed commercial quality galvanized.
  The appearance of Galvalume coating is quite distinctive. Its smooth, flat and fine spangle and a silvery metallic appearance make it attractive in unpainted applications.
  
  ALUZINC
  Aluzinc is a steel substrate coated on both sides with an aluminium-zinc alloy. The composition of the coating is: 55% aluminium, 43.4% zinc and 1.6% silicon.
  The excellent corrosion resistance of Aluzinc is a result of the properties of the two metallic substances: the barrier effect of the aluminium present on the surface of the coating and the sacrificial protection of zinc.

  Pre-Painted
  Prepainted metal is produced by adding paint or film coating to strip metals, primarily steel and aluminium, on a continuous basis. This process is called coil coating. Coil coating is a highly efficient means of coating strip metals before fabrication of finished components, providing a high quality, uniform and reproducible surface finish

  Hot Rolled & Cold Rolled
  In metalworking, rolling is a metal forming process in which metal stock is passed through a pair of rolls. Rolling is classified according to the temperature of the metal rolled. If the temperature of the metal is above its re-crystallization temperature, then the process is termed as hot rolling. If the temperature of the metal is below its re-crystallization temperature, the process is termed as cold rolling. In terms of usage, hot rolling processes more tonnage than any other manufacturing process, and cold rolling processes the most tonnage out of all cold working processes.
  

Jobs in Pak Euro Metal

Pak Euro Metal Operation Hours

Pak Euro Metal Reviews